Digital Display Wall Sensors

Digital Display Wall Sensors

« Back to Products

Digital Display Wall Sensors

Features

  • Display of room ambient temperature and user selected temperature setting on demand
  • 11 Icons and 4 digit LCDdisplay
  • Adjustable Occupied heatingand cooling setpoints
  • Push-button selection ofafterhours operation
  • Pushbutton selection of displaymode
  • Selectable °C or °F display
  • Self-diagnostic features

Details

Wall Sensor with Digital Display

The WS-061 Digital Display zone temperature sensor can be used with ASIC/1 controllers for measuring ambient zone temperature, for displaying and modifying the Occupied Temperature Setpoints, and for initiating after hours operation.

The wall mounted sensor utilizes a precision thermistor to measure and display zone temperature and deliver an analog signal to the ASIC/1 controller. The thermistor’s high change of resistance creates a large signal that eliminates lead wire resistance problems. When connected to an ASIC/1 controller, the WS-061 displays the Zone Temperature used by the ASIC/1 for control.

Features include telephone type 8-pin modular connector for easy connection to controller and trouble free installation using the SCP sensor cable. A communication jack at the bottom provides operator access for the Micro-SINC connected to a Windows computer. Using ASI Expert software, the user is able to read and reset the setpoints and parameters of the local controller as well as other ASIC/1 controllers. Air balancing, setpoint adjustment and all system startup can be accomplished through the WS sensor.

 

WS-MBS Modbus Wall Sensor with Digital Display

The WS-MBS Digital Display zone temperature sensor is used in conjunction with the ASIC/3 controllers for measuring ambient zone temperature, for displaying and modifying the Occupied Temperature Setpoints, and for initiating after hours operation.

The wall mounted sensor utilizes a precision thermistor to measure and display the zone temperature. The thermistor’s high change of resistance creates a large signal that eliminates lead wire resistance problems. The information on the WS-MBS is polled on the local bus of the ASIC/3 controller using Modbus protocol.