Essential Training-January 2019

January 7-10 | Ft. Lauderdale, FL

Essential Training-January 2019

Course Overview

The Essential Training course is your introduction to ASI Controls DDC systems. During this 4-day course (day 5 is optional) you will learn how to assemble a basic ASI system. You will learn about sequences in the pre-programmed ASIC/1 controllers and learn to configure simple ASIC/3 applications for solutions beyond the capabilities of our ASIC/1 line. After programming the controllers, you will learn how to use IntelliFront to build a front end for the controllers. There is an optional certification lab exercise on Friday for customers to become certified IntelliFront programmers.

Register

Early registration pricing is available until December 5, 2018. Prices will increase after that date. 

Cost

 $1,045 (4 days of training without IntelliFront certification or a training kit)

$1,745 (5 days of training with IntelliFront certification, but no training kit)

$2,345 (4 days of training without IntelliFront certification, but with training kit)

$3,045 (5 days of training with IntelliFront certification and a training kit) RECOMMENDED

Content

There is an additional cost of $700 for IntelliFront certification. Certification is required to purchase IntelliFront products. Certified IntelliFront programmers also receive a yearly engineering tool license for the software.

All attendees receive the following:

  • 4 days of training
  • Optional IntelliFront certification (Day 5)
  • ASI Expert software
  • ASIC/3-9540, ASIC/1-8100 and ASIC/1-6100 controllers
  • Micro-SINC and USB device cable
  • Handy carry case
  • 24 VAC transformer (to power the controllers)

If more than one person from your company attends the same course, or if your company has already purchased a training kit, then each additional person may pay a course fee of $1,045. After December 5, the cost will be $1,345. There is an additional cost of $700 for IntelliFront certification. Certification is required to purchase IntelliFront products. The additional persons may use our hardware for the course, but would not keep the hardware after the course.

 

Course Date/Location

The course begins at 8:30 AM and runs Monday, January 7 through Thursday, January 10. Attendees receiving IntelliFront Certification will meet on Friday, January 11 for the examination.

The course will be held at the Holiday Inn Ft. Lauderdale Airport.

2905 Sheridan Street
Hollywood, FL 33020
Phone: (954) 925-9100

Reserve your room by December 5, 2018 for discounted rates. Use Group Code “ASI” when making online reservations.

 

Candidate

An acceptable candidate for this program should have basic knowledge of HVAC and HVAC control systems. It is desirable that the candidate has some experience with designing, configuring, and/or installing DDC controls systems. The candidate should also be comfortable with the Microsoft Windows operating systems and be fluent in file management.

Each student needs a Windows 7 or newer PC with free USB port and a wired Ethernet connection. Many students also find it useful to bring an external mouse. Students must have administrative rights to their Windows account on their PC.  Google Chrome is recommended for use with IntelliFront software.

Special Accommodations

Please contact ASI Controls if you require auxiliary aids or services to have full participation and equal access to the facilities utilized for this training class.

Course Syllabus and Travel Information

Jan2019EssentialTraining [PDF]