ASI Controls Products
>> Switch to Product Summary View >> View System Architectures
>> Configurable Controllers Overview |
|
The ASIC/2-7540 is the
most powerful, flexible, and I/O capable controller in the ASI Controls line.
Ready to supervise a network of ASIC/1's in a building or sub-network within a
large facility, within high point count, multi-zone, green building, and other
demanding settings. Suitable for controlling of large equipment and many other
applications. Support for Modbus, acting as Modbus RTU master on the local bus. 
USB, RS-485, and RS-232 connections |
|
The ASIC/2-8540, a
powerful configurable controller for applications where I/O count does not
require an ASIC/2-7540. Capable of handling automation needs for small
facilities, controlling devices, supervisory duties, multi-zone and other
applications. Support for Modbus, acting as Modbus RTU master on the local bus.
Optional onboard Ethernet connectivity through ETH-8540 plugin module |
|
The SINC/3-3000 system
interface and network controller is intended for situations where a controller
is required for communications, polling or other supervisory duties but no I/O
points are required. Suitable for all ASIC/2 applications.
Ethernet ready, with four (4) RS-485, and two (2) RS-232 connections. Power, Tx
and Rx LEDs provide status |
|
>> Pre-programmed Controllers Overview |
|
The ASIC/1-6000 pre-programmed
digital controller is an integrated VAV controller and actuator. Suitable for
pressure-independent or pressure-dependent applications, can be used with
electric heat, hot water valve reheat, and fan powered boxes.
Integrated damper actuator, onboard calibrated airflow sensor |
|
The ASIC/1-6000-PD
pre-programmed digital controller is an integrated VAV controller/actuator
suitable for pressure-dependent applications. The ASIC/1-6000-PD can be used
with electric heat, hot water valve reheat, and fan powered boxes.
For pressure-dependent applications, integrated damper actuator |
|
The ASIC/1-6000-MB
pre-programmed digital controller is a VAV controller mounted on a metal base.
Featuring an onboard calibraded airflow sensor, it is suitable for
pressure-independent applications, and can be used with electric heat, hot
water valve reheat, and fan powered boxes.
For pressure-independent applications, no actuator, onboard calibrated airflow
sensor, metal base |
|
The ASIC/1-6000-MB-PD
pre-programmed digital VAV controller suitable for pressure-dependent
applications. The ASIC/1-6000-MB-PD can be used with electric heat, hot water
valve reheat, and fan powered boxes.
For pressure-dependent applications, no actuator, mounted on a metal base |
|
The ASIC/1-8655 pre-programmed
digital rooftop controller can be used to control heat pumps or packaged A/C
units with up to four stages of cooling, two stages of heating, and one
additional auxiliary stage. Controls economizer position based on mixed or
discharge air temperature, or CO2 level, and other applications.
8 inputs, 8 binary outputs, 2 analog outputs |
|
The ASIC/1-8800 pre-programmed
dual duct VAV and tracking controller. Includes canned sequences for common dual duct applications, with exhaust tracking to enable positive or negative pressure zones
Dual calibrated airflow sensors included onboard |
|
>> Software Overview |
|
ASI WebLink is the web
based interface for ASI control systems, delivering real-time system data to
your browser. WebLink, an OPC client, can connect to OPC Servers from other
control manufacturers and ODBC data sources to deliver true interoperability.
Unlimited point count.
Create web browser screens to show real-time data for client, building staff,
tenants |
|
ASI ZoneDial software
provides a web and/or telephone interface for requesting after-hours overrides from ASI
Controls systems. Control afterhours building energy use for HVAC and/or
lighting services, with detailed tracking of every user override request. Generate detailed invoices formatted for mailing.
Simple, convenient web-based tenant/user management and invoicing |
|
ASI OPC Server delivers
interoperability between ASI Controls systems and any OPC enabled software. Use
OPC to connect ASI systems with other manufacturer's OPC enabled devices or
networks.
Enables use of any OPC interface front end on ASI Controls systems |
|
ASI Monitor is a standalone application providing alarm
and event annunciation, with automated notifications delivered to an individual or group using cell phone, email, or pager. Can be deployed with modem |
|
ASI Visual Expert configures
ASI Controls systems, providing intuitive drag and drop graphical editing of
control sequences. Displays real-time system data in custom web browser
screens.
Document your control sequence diagrams in HTML with a click, and submit |
|
MobileXpert provides a
fully functional configuration and diagnosis front end interface for ASI
Control systems in a Windows-CE powered PDA device. Comes with pre-built
screens for all ASI devices.
Simplifies commissioning by providing rich, portable interface |
|
>> Networking Overview |
|
ASI Controls BACport BACnet/IP interface provides a BACnet/IP interface to
enable integration of ASI controllers into a system using a BACnet front end, and provides BACnet connectivity to OEM equipment under ASI control. Connects
an ASI controller or DDC network to a BACnet front end |
|
ASI Controls Etherlink/2 is a
low-cost device to connect an ASI controller or networked control system over
Ethernet, enabling internet browser viewing and editing of real-time data when
combined with LinkOPC and
WebLink.
Connects an ASI controller or network to a LAN/WAN or the Internet |
|
ASI Controls ETH-8540 Ethernet Expansion board is a plugin module that provides direct Ethernet connectivity on an ASIC/2-8540 configurable unitary controller. Provides cost-effective connectivity for remotely monitoring and controlling a network of small facilities and other networked control applications.  Plugs directly into the ASIC/2-8540 controller motherboard |
|
The ASI-C/R Converter Repeater is used to connect more than 32 controllers on a sub-network or network, to extend an RS-485 bus over 4,000 feet, or to protect exposed lines in a network from lightning strikes
Compatible with WebLink and VisualExpert |
|
The ePAD Operator Panel is a
convenient compact interface for panels and other settings. Fully customizable
4 line by 20 character display, scrolling through 20 lines. Customization is
done on a PC and synchronized.
Display system status, change setpoints and schedules, set or remove overrides,
process alarms |
|
>> Sensors |
|
ASI Controls line of sensors are designed to work optimally with the ASI Controls
line of controllers, network devices and other products. |
|
The WS-MOD Digital Display Sensor communicates with ASIC/2-7540 or -8540 configurable controllers
using Modbus RTU protocol. Options for local communication
connection, afterhours override pushbutton, and/or a linear potentiometer for variable user adjust of temperature setpoints Display system status, change setpoints, initiate overrides |
|
>> Accessories |
|
ASI Controls line of other accessories
are designed to work optimally with the ASI Controls
line of controllers, network devices and other products.
Modems, wiring harnesses, multiplex kits, resistors, covers, cables, cords etc |
|
Download ASI DDC guide specifications (PDF) (PDF; 99 KB)
Submit your contact information to get more information about ASI Controls building automation, energy management, or other digital control solutions.
Privacy policy. We will only use your contact information to respond to your inquiry. If you select the "OK if ASI Controls reseller contacts me" checkbox, we may share the information you submit with an ASI Controls reseller or system integrator. Your contact information will not be otherwise shared or sold.
Life Safety Disclaimer
ASI Controls products are not intended for or suitable for use, and shall not be used, as components in life support devices or systems, air quality devices or systems, or any aviation, nuclear or other application that protects, supports, or sustains life, where the failure of such component to perform can reasonably be expected to result in significant bodily injury, cause the failure of, or affect the safety or effectiveness of such device, system or application.