ASI Controls Products

The ASIC/2-7540 is the most powerful, flexible, and I/O capable controller in the ASI Controls line. Ready to supervise a network of ASIC/1's in a building or sub-network within a large facility, within high point count, multi-zone, green building, and other demanding settings. Suitable for controlling of large equipment and many other applications. Support for Modbus, acting as Modbus RTU master on the local bus.

USB, RS-485, and RS-232 connections

The ASIC/2-8540, a powerful configurable controller for applications where I/O count does not require an ASIC/2-7540. Capable of handling automation needs for small facilities, controlling devices, supervisory duties, multi-zone and other applications. Support for Modbus, acting as Modbus RTU master on the local bus.

Optional onboard Ethernet connectivity through ETH-8540 plugin module

The SINC/3-3000 system interface and network controller is intended for situations where a controller is required for communications, polling or other supervisory duties but no I/O points are required. Suitable for all ASIC/2 applications.

Ethernet ready, with four (4) RS-485, and two (2) RS-232 connections. Power, Tx and Rx LEDs provide status

The ASIC/1-6000 pre-programmed digital controller is an integrated VAV controller and actuator. Suitable for pressure-independent or pressure-dependent applications, can be used with electric heat, hot water valve reheat, and fan powered boxes.

Integrated damper actuator, onboard calibrated airflow sensor

The ASIC/1-6000-PD pre-programmed digital controller is an integrated VAV controller/actuator suitable for pressure-dependent applications. The ASIC/1-6000-PD can be used with electric heat, hot water valve reheat, and fan powered boxes.

For pressure-dependent applications, integrated damper actuator

The ASIC/1-6000-MB pre-programmed digital controller is a VAV controller mounted on a metal base. Featuring an onboard calibraded airflow sensor, it is suitable for pressure-independent applications, and can be used with electric heat, hot water valve reheat, and fan powered boxes.

For pressure-independent applications, no actuator, onboard calibrated airflow sensor, metal base

The ASIC/1-6000-MB-PD pre-programmed digital VAV controller suitable for pressure-dependent applications. The ASIC/1-6000-MB-PD can be used with electric heat, hot water valve reheat, and fan powered boxes.

For pressure-dependent applications, no actuator, mounted on a metal base

The ASIC/1-8655 pre-programmed digital rooftop controller can be used to control heat pumps or packaged A/C units with up to four stages of cooling, two stages of heating, and one additional auxiliary stage. Controls economizer position based on mixed or discharge air temperature, or CO2 level, and other applications.

8 inputs, 8 binary outputs, 2 analog outputs

The ASIC/1-8755 pre-programmed VAV tracking controller. Personalities for cooling only, and cooling with hot water or electric reheat.

Dual calibrated airflow sensors onboard

ASI WebLink is the web based interface for ASI control systems, delivering real-time system data to your browser. WebLink, an OPC client, can connect to OPC Servers from other control manufacturers and ODBC data sources to deliver true interoperability. Unlimited point count.

Create web browser screens to show real-time data for client, building staff, tenants

ASI ZoneDial software provides a telephone interface for requesting after-hours overrides from ASI Controls systems. Typically used to manage tenant requests for HVAC and/or lighting services outside of normal lease hours. ZoneDial provides an audit trail for every phone call and generates detailed invoices that are ready to print and mail.

Simple configuration; import Tenants, Users, Zones from CSV files

ASI OPC Server delivers interoperability between ASI Controls systems and any OPC enabled software. Use OPC to connect ASI systems with other manufacturer's OPC enabled devices or networks.

Enables use of any OPC interface front end on ASI Controls systems

ASI Monitor provides alarm and event monitoring, and automated notification to an individual or group by numeric pager, cell phone, or email.

Integrate into WebLink internet solution, or deploy standalone with modem

ASI Visual Expert configures ASI Controls systems, providing intuitive drag and drop graphical editing of control sequences. Displays real-time system data in custom web browser screens.

Document your control sequence diagrams in HTML with a click, and submit

MobileXpert provides a fully functional configuration and diagnosis front end interface for ASI Control systems in a Windows-CE powered PDA device. Comes with pre-built screens for all ASI devices.

Simplifies commissioning by providing rich, portable interface

ASI Controls Etherlink/2 is a low-cost device to connect an ASI controller or networked control system over Ethernet, enabling internet browser viewing and editing of real-time data when combined with LinkOPC and WebLink.

Connects an ASI controller or network to a LAN/WAN or the Internet

ASI Controls ETH-8540 Ethernet Expansion board is a plugin module that provides direct Ethernet connectivity on an ASIC/2-8540 configurable unitary controller. Provides cost-effective connectivity for remotely monitoring and controlling a network of small facilities and other networked control applications.

Plugs directly into the ASIC/2-8540 controller motherboard

The ASI-C/R Converter Repeater is used to connect more than 32 controllers on a sub-network or network, to extend an RS-485 bus over 4,000 feet, or to protect exposed lines in a network from lightning strikes

ASI Controls line of sensors and other accessories are designed to work optimally with the ASI Controls line of controllers, network devices and other products.

The ePAD Operator Panel is a convenient compact interface for panels and other settings. Fully customizable 4 line by 20 character display, scrolling through 20 lines. Customization is done on a PC and synchronized.